LG

When I've answered a call on my ENV3 using my Bluetooth headset, I sometimes would like to stop using the Bluetooth & transfer the call/audio to the phone itself.


I searched the ENV3 Users Guide and done some Googling, but I can't seem to find the answer. The only info I've found that's even remotely related is located here pertaining to a bug fix in the v05 firmware:


http://www.lg-phones.org/lg-env3-firmware-v05-is-out.html


"Open the flip and press keypad during a voice call audio transfer to phone Close
the flip and try to put audio back to the Bluetooth headset by using audio to device
option on the phone. The phone fails to transfer audio."


It's not very clear at all, but from reading this I assume that you can switch back 'n forth between a Bletooth device & the phone by opening/closing the flip? Also, what is the "audio to device option" it's referring to?


Any further info or advice will be much appreciated.

thanks,
JohnB

You can transfer the Audio to and from a Bluetooth device by accessing the options from the front screen by pressing "OK" then scroll down to "Transfer Audio to Phone" Or just the opposite "Transfer to Device" the device being the Bluetooth device. Opening and closing the Flip while on a call transfers the audio from the ear piece to Speaker Phone and back.

Also version "06" is the latest software for the enV3. You can download the updater program from "www.lgmobilephones.com" under Mobile Phone Support.

Thanks so much for the info! I searched the ENV3 User's Guide PDF for "transfer", "audio", "Bluetooth", etc., and it came up with nothing relevant. Definitely an oversight on LG's part - hopefully they'll include this info in the next rev of the User's Guide.

Yes, I'm already using the v06 firmware. I only included that v05 link because it was the only place I found any info at all about transferring Bluetooth audio on the ENV3.

Thanks again - I've been going crazy trying to figure this out.

best,
JohnB

where can check to see which firmware you are using?

Posted by SolarCenturion on 09 Jun 2010 14:41 PM:

where can check to see which firmware you are using?

If you go to settings>>Phone Info>> You will see "SW/HW Version" Click on it and it will show you the Software version in your phone... The last 3 digits are the version like "V06" would mean that you have Version 06 running your phone.